Most of the time the height of the furniture is predetermined. It doesn’t care whether you are too tall or too short, sometimes the height of the furniture can be very annoying. If the height of the chair or stool is off, it can affect your posture and comfort. Imagine it, if your bar stool is not tall enough, then it will make you uncomfortable. To face this kind of problem, you can try to make your own DIY stool leg extenders as explained below.
See also: Bar Stool Extenders Tips for Purchased or DIY
This Are The Steps To Make Homemade Chairs Leg Extenders You Have To Follow
Choose The Right Material For Extenders
First thing first you have to decide what kinds of material will be the best suit as the extenders. If you are those types of people who care about visuals, this step is the most crucial because you don’t want it looks off. Not only about the appearance, but also the most fitted materials. You can use many kinds of materials, such as PVC pipe, wooden bar, etc. For example, if you have rounded legs stool seats then choose the PVC pipe.
Determining The High You Want
(Example for rounded legs stool) The next step is deciding how tall you want your seat is. Take a precise measurement from the bottom of the crossbars to the height you want to. The reason is that the stool leg extenders will be under the crossbars. This method only works for stool with crossbars, if it is not then you better buy the pre-made ones. You can also measure from the floor to the ideal height you want.
Measuring The Extender’s Length
After getting the ideal height, now you need to gauge the distance from the edge of the crossbars to the floors. Write it down. The distance from the seat of the stool to the floor also needs to be measured. After having the two measurements, now you need to subtract it with the desired height. The difference or the result of reduction will be added to the distance from the bottom edge of crossbars to the floor.
Cut According To The Measurement
With the right measurement in hand, now it is time to cut and make the stool leg extenders. If you are using PVC pipe, then choose one with the diameter bigger than the stools’ legs. Because you will put the legs inside the pipe. If you are using wood, then cut and measure to fit the legs size. Cut the ends of extenders sot the stools sit levels. You can simply cut the end of the legs is straight, but if it outward than cut it in angle.
Apply The Cut Material On The Bottom Of The Stool
If the cut material is ready, you can start to apply it. if using PVC pipe then fit it on the bottom of each leg and push it until reaching the crossbars. This kind of extender won’t stay with the chair if you lift it. To make the stool leg extenders stay with it, you can always nail it together. In contrast with the PVC pipe, the wood one needs to be nailed down together with the legs on the inside.
Those are the DIY steps you can follow for homemade legs extenders. The important part of the progress is choosing the right material. If it made of wood (classic for legs bar stool) then use wood, on the other hand using PVC pipe is good for a rounded legs bar stool. Continue it by picking the desired high, measure from the floor to crossbars, cut accordingly, and apply it. Hopefully, this can help you, but if it is too hard you can always buy the premade ones.
See also: Round Wood Fence Posts with DIY Install Wood Fence
So, if you desire to receive all these magnificent photos about 5 Easy DIY Steps To Make Stool Leg Extenders, press save icon to download these shots to your computer. There’rebar stool chair leg extenders available for download, if you love and wish to get it, just click save symbol on the article, and it will be directly saved to your desktop computer.
Here you are at raysahouse.com, content above 5 Easy DIY Steps To Make Stool Leg Extenders published. Many people searching for specifics of bar stool chair leg extenders and certainly one of these is you, is not it?