If you want a clean dining area, adding a simple breakfast bar with matte black hairpin legs is a great choice. Because it looks simple, this furniture can be made at home as a DIY project. You only need some materials and equipment to make hairpin bar stools. If you’re curious, see the complete information below.
See also: Finding Out the Advantages of Choosing Modern Black Leather Bar Stools
Reasons to Choose Hairpin Design
Hairpin legs are a design that solves the problem of sturdy and durable furniture with minimal materials. In this modern era, practicality is an essential aspect to get a harmonious look. Hairpin models on furniture stools will also work perfectly to turn old furniture into something beautiful.
If you are a creative person, you can turn old pieces of wood that should be wasted into functional and stylish furniture. It gives a significant advantage to the table in your home because it lasts for years. To do a DIY hairpin stools project, you can do it yourself. But if you want to finish the process faster, getting help from other people is better.
Materials Needed
The hairpin bar stools have a practical and straightforward model. It will be effortless to make with just a few tools and materials you have at home. You can prepare a set of hairpin legs with the ideal height (use 40cm legs as a benchmark). In addition, prepare a sturdy wood material. But it is recommended if you use an oak workbench.
Besides the primary materials, you will also need an electric drill, tape measure, pencil, screws, and brackets. Please note that the frame is supplied with the hairpin leg. To make it easier to display attractive bar stools, you can prepare sandpaper and work table oil if the wood has an old look. As a result, the DIY projects you make look exciting and stunning.
How to Make a Hairpin Footstool Easily
In the first step, you have to cut the chair to the correct size. If necessary, sand it and grease it with the previously prepared material. If you don’t have the right tools for cutting wood materials or hairpin bar stools, try renting them at the nearest local DIY hardware store. But if you don’t want to be complicated, you can use a simple manual saw.
Then, you can measure where you want to install the hairpin bar stool model. Make pencil marks through the screw holes on each woodside. Next, remove the leg and drill a small pilot hole downward using a pencil mark. This process will make it easier to hit the pilot holes used to attach the bench.
Continue with drilling the wood and snap the legs back into place. Please make sure that it is aligned with the hole in the leg with the pilot hole. You can use an electric drill to drill holes in the wood. Turn the stool over and attach a floor guard to make the ideal hairpin bar stools. Then, don’t forget to test them to ensure their quality.
All in all, this DIY project is effortless to do if you want a simple furniture look. We could put this furniture in the breakfast bar. The choice of black legs is also suitable for combining a variety of unique residential designs and concepts. If you want to make a bench as a DIY project, please do it step by step according to the guide above.